Is Vape Vapor Supposed to Be Hot or Cold? A Complete Guide

Vaping has become a popular alternative to smoking, but many people wonder about the temperature of vape vapour. Is it supposed to be hot, cold, or somewhere in between? In this article, we’ll explore everything you need to know about vape vapour temperature, including what affects it, how to adjust it, and tips for a better vaping experience. Whether you’re a beginner or an experienced vaper, this guide will help you understand how to get the most out of your device.

What Temperature Should Vape Vapour Be?

Vape vapour is typically warm, but it shouldn’t feel uncomfortably hot or icy cold. The ideal temperature is smooth and comfortable, providing a pleasant experience without any harshness. However, the exact temperature can vary depending on your device, settings, and e-liquid.

Key Points:

• Vapour is usually slightly warm.

• It should never feel scalding hot or extremely cold.

• The temperature depends on your device and settings.
  

What Affects Vape Vapour Temperature?

Several factors influence how warm or cool your vape vapour feels. Let’s break them down:

1. Device Type and Power

The type of device you use plays a big role in vapour temperature:

• High-Powered Devices (e.g., Sub-Ohm Mods): These produce warmer vapour because they use higher wattage and lower resistance coils, which generate more heat.

• Low-Powered Devices (e.g., Disposables or Pod Systems): These create cooler vapour as they operate at lower wattages, making them ideal for a smoother experience.

2. Wattage and Coil Resistance

• Higher Wattage: Increases heat, resulting in warmer vapour.

• Lower Resistance Coils (Sub-Ohm): Produce warmer vapour compared to higher resistance coils.

3. Airflow Settings

• More Airflow: Cools the vapour, making it feel cooler and smoother.

• Restricted Airflow: Makes the vapour feel warmer and denser.

4. E-Liquid Composition

• PG (Propylene Glycol): Produces a warmer throat hit.

• VG (Vegetable Glycerin): Creates cooler, smoother vapour.

5. Device Settings

Advanced devices with temperature control allow you to fine-tune the vapour temperature to your preference.

• For more troubleshooting tips, read our article Common Vaping Problems and How to Fix Them.
  

How to Adjust Vapour Temperature

If your vapour feels too hot or too cold, you can make adjustments to improve your experience. Here’s how:

Vapour Too Hot?

1. Lower the Wattage: Reduce the power setting on your device.

2. Increase Airflow: Open up the airflow vents to cool the vapour.

3. Check E-Liquid Levels: Ensure your tank isn’t running dry, as dry hits can feel extremely hot.

4. Use Higher Resistance Coils: These produce cooler vapour compared to sub-ohm coils.

Vapour Too Cold?

1. Increase Wattage: Raise the power setting to generate more heat.

2. Reduce Airflow: Restrict the airflow to make the vapour feel warmer.

3. Use Lower Resistance Coils: Sub-ohm coils produce warmer vapour.

Tips for a Better Vaping Experience

Here are some practical tips to ensure your vapour temperature is just right:

1. Start Low and Go Slow

• Begin with lower wattage and gradually increase it to find your preferred temperature.

2. Experiment with Airflow

• Adjust the airflow settings to balance warmth and smoothness.

3. Choose the Right Device

• If you prefer cooler vapour, opt for a pod system or disposable vape.

• If you enjoy warmer vapour, go for a sub-ohm mod.

4. Stay Hydrated

• Warmer vapour can sometimes cause dry mouth, so drink water regularly.

5. Use Quality E-Liquids

• High-quality e-liquids with the right PG/VG ratio can enhance your vaping experience.

Common Questions About Vapour Temperature

1. Why Does My Vape Feel Too Hot?

If your vape feels too hot, it could be due to:

• High wattage settings.

• Low e-liquid levels (causing dry hits).

• Restricted airflow.

2. Can Vapour Be Too Cold?

While cooler vapour is generally smoother, it can feel too cold if:

• The wattage is too low.

• The airflow is too high.

3. What’s the Best Temperature for Flavour?

Warmer vapour (around 200-220°C) often enhances flavour, but this depends on your e-liquid and device.

• For a detailed guide on handling overheating issues, check out our post What To Do If Your Vape Overheats
  
  

Vapour Temperature Comparison Table

Conclusion

Vape vapour is typically warm, but the exact temperature depends on your device, settings, and e-liquid. By understanding the factors that affect vapour temperature, you can adjust your device to create a smooth and enjoyable experience. Whether you prefer warmer or cooler vapour, the key is to find a balance that feels comfortable for you.

Remember to experiment with wattage, airflow, and coil resistance to fine-tune your vaping experience. And if you ever feel like your vapour is too hot or too cold, refer back to this guide for quick fixes.

Happy vaping!